If installing top capping:
TRELLIS:
Align with the front edge of the post and screw down through the capping and into the top of the panel frame using 4.5mm / 5mm x 100mm stainless steel screws (this can be plugged and filled if preferred).
(View from above)
SLATTED:
Align with front slat of panel and screw down into top of posts and centre vertical (if possible) using 4.5mm / 5mm x 100mm stainless steel screws (this can be plugged and filled if preferred).
(View from above)
Download the Guide - Installation of Top Capping (0.2 MB)
